• 文献标题:   Dynamic Mechanical Behavior of Graphene Oxide Functionalized Curaua Fiber-Reinforced Epoxy Composites: A Brief Report
  • 文献类型:   Article
  • 作  者:   COSTA UO, NASCIMENTO LFC, BEZERRA WBA, AGUIAR VD, PEREIRA AC, MONTEIRO SN, PINHEIRO WA
  • 作者关键词:   dma, graphene oxide, curaua fiber, epoxy composite
  • 出版物名称:   POLYMERS
  • ISSN:  
  • 通讯作者地址:  
  • 被引频次:   7
  • DOI:   10.3390/polym13111897
  • 出版年:   2021

▎ 摘  要

The coating of natural fiber by graphene oxide (GO) has, over, this past decade, attracted increasing attention as an effective way to improve the adhesion to polymer matrices and enhance the composite properties. In particular, the GO-functionalized 30 vol% curaua fiber (Ananas Erectifolius) reinforcing epoxy composite was found to display superior tensile and thermogravimetric properties as well as higher fiber/matrix interfacial shear strength. In this brief report, dynamic mechanical analysis (DMA) was conducted in up to 50 vol% GO-functionalized curaua fiber reinforced epoxy matrix (EM) composites. The objective was not only to extend the amount incorporated but also for the first time investigate the composite viscoelastic behavior. The GO functionalization of curaua fibers (GOCF) improved the DMA storage (E') and loss (E '') modulus compared to the non-functionalized fiber composites. Values at 30 degrees C of both E' (13.44 GPa) and E '' (0.67 GPa) for 50 vol% GO-functionalized curaua fiber reinforced epoxy matrix composites (50GOCF/EM) were substantially higher than those of 20 GOCF/EM with E' (7.08 GPa) and E '' (0.22 GPa) as well as non-functionalized 50CF/EM with E' (11.04 GPa) and E '' (0.45 GPa). All these results are above the neat epoxy previously reported values of E' (3.86 GPa) and E '' (0.09 GPa). As for the tangent delta, the parameters associated with damping factor and glass transition temperature were not found to be significantly changed by GO functionalization, but decreased with respect to the neat epoxy due to chain mobility restriction.