▎ 摘　　要

The present study focused on the development of magnesium-functionalized graphene oxide (FGO) coating on titanium alloy (Ti6Al4V) by electrophoretic deposition. Graphene oxide (GO) was synthesized by modified Hummers' method and functionalized with magnesium ions. X-ray diffraction, infrared spectroscopy (IR) and Raman spectroscopy were employed to confirm the synthesis of GO and GO-coatings on T16Al4V. Functionalization of GO with Mg ions was confirmed by energy dispersive X-ray spectroscopy. The surface morphology of coated samples was examined through scanning electron microscopy. Reduction of FGO coating (labelled as rFGO) by heating at 200 degrees C was confirmed by IR. The rFGO coated Ti6Al4V was found to be hydrophilic in nature as determined by contact angle measurement which showed reduction in the contact angle of Ti6A14V from 95.4 degrees to 42.1 degrees. The percent cell viability over the coated sample was appreciably improved compared to as-received Ti6Al4V sample owing to hydrophilicity of the former. The positive shift in open circuit potential and increase in polarization resistance was observed after coating Ti6Al4V samples with FGO. The significant decrease in the corrosion current density and negative polarization loop in the reverse scan of samples also confirmed the improved corrosion resistance of rFGO-coated Ti6Al4V over uncoated Ti6Al4V in the PBS solution. Furthermore, the impedance spectroscopy revealed that the preferential adsorption of ionic species (indicated by large R-ads) at the surface improved the barrier characteristics of rFGO coated samples and exhibited an order of magnitude higher R-c(t) compared to as-received samples.