▎ 摘　　要

In the present work, aluminum matrix composites reinforced with graphene nanoplatelets (GNPs: 0.15-0.45wt.%) and silicon dioxide (SiO2: 1, 3, 6, 9wt.%) were produced by the powder metallurgy method. Hardness, compressive strength, density, friction coefficient, and wear rate of the prepared specimens were examined. According to the experimental results, the best compressive strength (similar to 390 MPa), density (similar to 2.66 g/cm(3)), hardness (similar to 62 HV), the lowest porosity (similar to 1.3%), friction coefficient (similar to 0.19 for a load of 10 N), and wear rate (similar to 0.003 mm(3)/Nm for a load of 5 N) were detected et al.-6SiO(2)-0.15graphene composite. Compared to pure Al, the compressive strength, hardness, and wear resistance of Al-6SiO(2)-0.15graphene composite were improved by similar to 110%, similar to 106%, and similar to 107, respectively. Hence, it may be concluded that SiO2 has excellent wear resistance and graphene has remarkable strength, good solid lubricating properties for Al-based composites.