▎ 摘　　要

In this paper, new cost-effective platinum-free and flexible counter electrodes (CEs) for dye-sensitized solar cells (DSSCs) were reported. The ITO/PET CEs were produced using graphene films synthesized by CVD method and graphene flakes with addition PEDOT: PSS or PEDOT: PSS/PVP. The influence of mechanical stress arising from the bending of a flexible substrate on morphology, resistance of CEs as well as electrical properties of DSSCs was analyzed. The testing of these electrodes in DSSCs have demonstrated a power conversion efficiency of up to 3.95% to compare with the power conversion efficiency of 4.39% for DSSC with a standard Pt-based CE. After 100 bending cycles the electrodes demonstrated power conversion efficiency in range the 2.37-3.23% to compare with the power conversion efficiency of 2.08% for DSSC with a standard Pt-based CE. HRTEM investigation confirms the crystallographic structure of graphene. The obtained results demonstrate the possibility of replacing expensive platinum in DSCC by using graphene-based counter electrode. (C) 2017 Elsevier B.V. All rights reserved.