▎ 摘　　要

The liquid phase exfoliation (LPE) method, as a cheap, easily scalable, and eco-friendly method, was used to produce defect-free, unoxidized graphene. A surfactant-free technique was used to concentrate the graphene dispersion through stabilization by carbon nanotubes (CNTs) without functionalization. A special kind of aligned CNT bundles, which can be well dissociated into single CNTs in N-methyl-pyr-rolidone by sonication, was used and fabricate Gr-CNT hybrid by pi-pi interaction. A redispersed stable Gr-CNT dispersion at a concentration of 2 mg mL(-1) was used for preparing Gr-CNT/thermoplastic polyurethane (TPU) dielectric composite. The results show that the addition of 3.0 vol.% of hybrid improves the dielectric constant of the TPU greatly. As a result, a 10 times increase in electromechanical sensitivity (beta) at 1000 Hz and 3.4 times increase in actuated strain at a low electric field (7.5 kV/mm) was achieved. The breakdown strengths of the Gr-CNT/TPU composites with 0.25 vol.% and 1.0 vol.% of hybrid are much higher than that of the pure TPU. As a result, the maximum actuated strain increases greatly from 4.8% for the pure TPU to 7% for the composite with 0.25 vol.% of the hybrid. Meanwhile, the energy density increases from 18 kJ/L for the pure TPU to 25 kJ/L and 48 kJ/L for the composites with 0.25 and 1.0 vol.% of hybrid, respectively. (C) 2016 Elsevier Ltd. All rights reserved.