▎ 摘　　要

Many preparation methods reported for polymer/graphene nanocomposites are associated with graphene surface modification and consumption of organic solvents. A facile, green and novel approach has been developed in this study for preparation of epoxy/graphene nanocomposites. The approach involves microwaving a commercial graphene precursor and mechanically stirring to produce graphene platelets in a hot, liquid-state epoxy resin, eliminating the need for organic solvents and surfactants. The process created both single-layer graphene and graphene platelets of 4.17 +/- 0.63 nm in thickness and 1.00 -4.77 mu m in lateral dimension. Most of the surface oxygenated groups survived in this process, and more importantly, the process grafted epoxy molecules with graphene platelets. A thin film of platelets displayed an electrical conductivity of 889 +/- 141 S/cm. The platelets caused large improvements to the mechanical and functional properties of the epoxy, i.e. 175% increase in critical strain energy release rate at 1.03 vol% of graphene, 14.9% increase in Young's modulus at 1.55 vol%, a percolation threshold of electrical conductivity at 0.85 vol%, and a glass transition temperature increment from 85.4 to 100.0 degrees C at 1.03 vol%. The research clearly demonstrates the use of microwave radiation as an environmentally sustainable, low-cost and simple method for the development of polymer nanocomposites containing exfoliated and well-dispersed graphene platelets. (c) 2021 Elsevier Ltd. All rights reserved.