▎ 摘　　要

The mechanical responses under superelastic loading cycles and the corrosion protection capacity of two graphene-based coatings applied to a NiTi alloy were evaluated. Graphene oxide (GO) and a composite of reduced graphene oxide (rGO) incorporated in a block copolymer of styrene-ethylene-butylene-styrene (SEBS) were deposited on the substrate via dip-coating. The morphology of the coatings was characterized by scanning electron microscopy (SEM) before and after uniaxial loading cycles up to 6%. Atomic force microscopy (AFM) was also used to evaluate the roughness of the coatings, which was expressed in terms of average roughness (Ra). The corrosion behavior was studied by potentiodynamic polarization (PP), electrochemical impedance spectroscopy (EIS), and Mott-Schottky analysis (MSA). SEM images suggested that both GO and rGO + SEBS create uniform coatings on the substrate. The measured Ra was 25 +/- 3 nm for the bare NiTi, 24 +/- 3 nm for the GO coated NiTi, and 8 +/- 2 nm for the rGO + SEBS coated NiTi. Both coatings presented the capacity of following several superelastic cycles, maintaining their morphological integrity. PP and EIS showed that only the rGO + SEBS coating results in a significant improvement in terms of corrosion resistance. Furthermore, rGO + SEBS decreased the oxygen vacancies in the passive film when compared with the bare NiTi and GO coating.