▎ 摘　　要

Graphene oxide prepared by the Hummers method was chemically modified by 3-aminopropyltriethoxysilane and spherical paraffin@ modified graphene-oxide particles (P@m-GO) with a core-shell structure were obtained by an emulsion method. P@m-GO filler/silicone rubber (SIR) matrix composites (P@m-GO/SIR) were prepared by dispersing different amounts of P@m-GO in the SIR precursors, followed by curing and were used as thermal interface materials ( TIMs). Results indicate that the best TIM had a P@m-GO loading of 60 wt.% and had both a high thermal conductivity (1.248 W.m(-1).K-1) and a high latent heat (88.7 J.g(-1)). Its compression elastic modulus (1.01 MPa) was only one-eighth of that of the pristine SIR (8. 16 MPa) due to the plasticity of the paraffin. The paraffin leakage under pressure was low (below 3.98 wt.% ) before and after thermal cycling 50 times. These favorable thermal and mechanical properties together with the good cycling stability make it a promising TIM for electronic devices.