• 文献标题:   3D SnO2/Graphene Hydrogel Anode Material for Lithium-Ion Battery
  • 文献类型:   Article
  • 作  者:   BAI XJ, HOU M, LIU C, WANG BA, CAO H, WANG D
  • 作者关键词:   graphene hydrogel, sno2, lithiumion battery, anode, threedimension
  • 出版物名称:   ACTA PHYSICOCHIMICA SINICA
  • ISSN:   1000-6818
  • 通讯作者地址:   Shanghai Aerosp Power Technol LTD
  • 被引频次:   1
  • DOI:   10.3866/PKU.WHXB201610272
  • 出版年:   2017

▎ 摘  要

With the widespread use of mobile electronic devices and increasing demand for electric energy storage in the transportation and energy sectors, lithium-ion batteries (LIBs) have become a major research and development focus in recent years. The current generation of LIBs use graphite as the anode material, which has a theoretical capacity of 372 mAh.g(-1). Tin-based materials are considered promising anode materials for next-generation LIBs because of their favorable working voltage and unsurpassed theoretical specific capacity. However, overcoming the rapid storage capacity degradation of tin caused by its large volumetric changes (>200%) during cycling remains a major challenge to the successful implementation of such materials. In this paper, SnO2 nanoparticles with a diameter of 2-3 nm were used as active materials in LIB anodes and a three-dimensional (3D) graphene hydrogel (GH) was used as a buffer to decrease the volumetric change. Typically, SnCl4 aqueous solution (18 mL, 6.4 mmol.L-1) and graphene oxide (GO) suspension (0.5% (w, mass fraction), 2 mL) were mixed together via sonication. NaOH aqueous solution (11.4 mmol.L-1, 40 mL) was slowly added and then the mixture was stirred for 2 h to obtain a stable suspension. Vitamin C (VC, 80 mg) was then added as a reductant. The mixture was kept at 80 degrees C for 24 h to reduce and self-assemble. The resulting black block was washed repeatedly with distilled deionized water and freeze-dried to obtain SnO2-GH. In this composite, GH provides large specific surface area for efficient loading (54% (w)) and uniform distribution of nanoparticles. SnO2-GH delivered a capacity of 500 mAh.g(-1) at 5000 mA.g(-1) and 865 mAh.g(-1) at 50 nnA.g(-1) after rate cycling. This outstanding electrochemical performance is attributed to the 3D structure of GH, which provides large internal space to accommodate volumetric changes, an electrically conducting structural porous network, a large amount of lithium-ion diffusion channels, fast electron transport kinetics, and excellent penetration of electrolyte solution. This study demonstrates that 3D GH is a potential carbon matrix for LIBs.