▎ 摘　　要

The nonlinear thermal stability responses of functionally graded graphene-reinforced composite (FG-GRC) laminated plates with single or multiple through-the-width delaminations, are investigated in the article. The possibility of delamination growth is evaluated using the three-dimensional crack tip element (3D-CTE) method, which determines the energy release rate (ERR) at the delamination edge. Furthermore, the influence of delamination configurations and the types of graphene reinforcement distribution patterns, on the free vibration of FG-GRC delaminated plates in thermally pre/post-buckled regimes is evaluated. The von Karman geometrical nonlinearity is adopted in a solution based on the layerwise third-order shear deformation theory (TSDT). The nonlinear equilibrium equations derived by the minimum total potential energy principle are solved using the Ritz method in conjunction with the Newton-Raphson iterative procedure. A three-dimensional finite element model is also developed using ABAQUS to corroborate the accuracy of the theoretical results. Parametric studies reveal that while the FGX graphene distribution pattern improves the bending stiffness of delaminated composite plates more than FGA, the ERR at the near surface delamination edge in FGX pattern is twice as high as that in FGA. This implies that the possibility of delamination propagation in FGX plates can be higher than FGA. Additionally, while the fundamental frequency of the FGX plate with and without delamination exceeds the frequency of other graphene distribution patterns at the reference temperature, its natural frequency is the lowest among all patterns in the post-buckled regime.