▎ 摘　　要

A novel ternary composite was synthesized comprising reduced graphene oxide (RGO), beta-cyclodextrin (beta CD), and epichlorohydrin (RGO-beta CD-ECH). The electrical and structural properties of the composite were analyzed by using Zeta potential, RAMAN, XRD, FTIR, BET, and SEM. It was encouraging to find out that the composite shows exceptional adsorption performance for Cr(VI) removal from water both in batch as well as Fixed bed adsorption column (FBAC) study. The optimized adsorption parameters were: adsorbent dosage 0.2 g/L, initial Cr(VI) concentration 300 mg/L, contact time 75 min, temperature 30 degrees C, and solution pH 1.0. Among the isotherm models, the Langmuir model proved to be a better fit, and maximum capacity (q(m)) can reach up to 1321.01 mg/g, whereas kinetic data follows the pseudo-second-order kinetic model. From the Boyd plot, it was confirmed that the rate-limiting step was controlled by intra-particle diffusion. The thermodynamic analysis confirmed that the adsorption process was an endothermic, entropy-driven, and spontaneous process. From the FBAC study, it was observed that with an increase in bed height, the parameters like bed capacity (q(bed)), breakthrough time (t(b)), and exhaustion time (t(e)) of the composite increase, and as the Cr(VI) flow rate increases the value decreases. To fit experimental data of the FBAC study, Thomas, Yoon-Nelson, and BDST model was used. Besides, it can easily and efficiently regenerate with a small effect on removal percentage. In binary solution, the results showed that coexisting ions like SO42-, NO3-, Cl-,Cu2+, Co2+, and, Ni2+ had no such substantial effect on Cr(VI) adsorption. These characteristics implied the applicability of these novel composites in the application of Cr(VI) contaminated groundwater or industrial wastewater in both batch and continuous mode.