▎ 摘　　要

In this study, polyurethane (PU) nanoweb was treated with non-oxidized graphene (nOG)/polydimethylsiloxane (PDMS) using heat, ethanol, and PDMS treatments to fabricate a textile-based strain sensor for respiration measurement. To fabricate wearable strain sensors, PU nanoweb was treated with 1 wt% nOG dispersion and dried at room temperature (21 degrees C) for 24 hours, and the specimen was named specimen G. PU nanoweb treated with nOG and dried at 50 degrees C for 1 hour in a vacuum oven chamber was named specimen GH. PU nanoweb immersed in ethanol for 15 minutes, then treated with nOG, and dried at room temperature for 24 hours, was named specimen GE. The specimen treated with both heat and ethanol treatments shrunk and was damaged and even melted. To evaluate the electrical property of the specimens, electrical linear resistance was measured using a multimeter device. To characterize the surface, chemical, and tensile properties, a field emission scanning electron microscopy, fourier transform infrared spectroscopy, and an universal tensile machine were utilized. To acquire and analyze the respiratory signals, MP150 (Biopac system Inc., USA) and Acqknowledge (ver. 4.2, Biopac system Inc., USA) were used. All signals were obtained in real time. The results showed that specimen GE had the lowest resistance (8.6 omega cm(-2)) when unstrained. Specimen GHP had the least difference (104.6 omega cm(-1)to 451.2 omega cm(-1)) when strained at 5% and 10%. The surface of the treated specimens were coated with the nOG and PDMS. Specimens GP, GHP, and GEP were more durable and stretchable due to the PDMS treatment. Also, the specimens showed repetitive and stable signals corresponding to inhalation and exhalation. This study, therefore, is a meaningful research in the development of ultra-thin and ultra-lightweight textile-based strain sensors for respiration measurement using nOG/PDMS/PU nanoweb.