▎ 摘　　要

Solar-thermal technology based on phase change materials (PCMs) has received a lot of attention as a cost-effective and practical way to overcome solar energy intermittency. However, weak photothermal conversion ability and complex preparation processes have hindered the practical application of PCMs. In this work, a new approach for facile, uniform, and firm assembly of graphene nanoplatelet (GNP) through the reaction of graphene oxide (GO) with the silanized melamine foam (MF) is introduced. Here, the deposited amino siloxane layer not only promotes the adhesion and integrity of embedded GNP/GO nanosheets but also facilitates the synthetic route compared to the previous studies. Following the reduction of GO with oleylamine (OA), the hybrid GNP/rGO foams with an integrated network were obtained. The composite PCMs were prepared through the incorporation of paraffin wax (PW) into the hybrid structure. The high hydrophobicity and porosity of the GNP/rGO foams resulted in a high loading of paraffin wax (nearly 97 wt%) and thus large transition enthalpy of 182 J g-1. The GNP/rGO framework provided excellent solar-thermal storage efficiency of up to 92.2%. The PCM composite containing the highest content of GNP (6 wt%) revealed an enhanced thermal conductivity by 87% compared to the unmodified MF/PW composite.(c) 2022 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).