▎ 摘　　要

A composite membrane for fuel cell applications was prepared by incorporating custom-made graphene oxide (GO) in Nafion resin. The GO was used to provide mechanical reinforcement to Nafion. Transmission electron microscopy confirmed the formation of highly crystalline and individually-dispersed graphene oxide sheets. Tensile strength, water uptake, swelling, proton conductivity and electrical conductivity of the composite membranes were measured and compared with pure Nafion. The polarization curves indicated that the fuel cell performance of the 3wt% GO/Nafion composite membrane was similar to that of the pure Nafion membrane, but the composite membrane was superior to Nafion in terms of mechanical properties. (C) The Author(s) 2014. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited. All rights reserved.