▎ 摘　　要

In this work, we analyze the design of a graphene- and germanium-based plasmonic sensor with photonic spin Hall effect (PSHE) for detection of refractive index (RI) of a gas medium and magnetic field (B) applied to the graphene monolayer in THz frequency region. The PSHE phenomenon is studied in both conventional as well as modified weak measurements. The effect of gaseous medium thickness (d(4)), transverse magnetic (TM) mode's order, and amplified angle parameter (delta) is studied on the sensor's performance. Parameters such as sensitivity, resolution, and figure of merit have been considered for sensor's performance evaluation. The results indicate that in the conventional weak measurements, for a TM1 mode (with d(4) = 20 mu m, B = 0, and delta = 0.1 degrees), an RI resolution of 2.32 x 10(-12) RIU is achievable for gas medium in the range 1-1.1 RIU. In the modified weak measurements, for a TM3 mode (with d(4) = 100 mu m, B = 0, and delta = 0.1 degrees), the RI resolution close to 1.39 x 10(-10) RIU is achievable for gas sensing. The same sensor design was also studied for magnetic field sensing while keeping the value of gaseous medium RI (n(4)) as 1. The results indicate that for a TM1 mode (with d(4) = 20 mu m and delta = 0.1 degrees), in the conventional weak measurements, a magnetic field resolution of 5.31 x 10(-4) mu T (i.e., 0.53 nT) is achievable for a range 0-1 T of B. Further, it is found that in contrast with the conventional case, the resolutions in the modified weak measurements are improved for large values of the delta. Some of the results emerge better or comparable with the resolutions of RI and magnetic field measurement (5 x 10(-9) RIU and 0.7 mu T or 1.22 x 10(-11) RIU and 1.46 x 10(-2) mu T) existing in the literature.