▎ 摘　　要

Polylactic acid (PLA) biopolymer appears to provide environmental advantages over the petroleum-derived polymers but often ends up with limited applications owing to their poor mechanical performance and brittleness. Herein, we present a PLA polymer compatible graphene oxide (GO) based crosslinker with the intention of improving the mechanical properties. Lactic acid (LA) functionalized GO (GO-LA) crosslinker was prepared and had been crosslinked with the PLA chains through a one-step polycondensation reaction. The mechanical properties of the as-synthesized GO crosslinked PLA (GO-C-PLA) were investigated by compression tests and compared with neat PLA, and GO reinforced PLA (GO-PLA) with no crosslinking. With 0.3% of GO-LA crosslinker in GO-C-PLA, the compressive modulus increased by nine times compared to that of the neat PLA. The compressive strength also increased to 46 MPa, which was four times higher than the neat PLA. This strategy for improving the mechanical properties by introducing GO-based crosslinker can be used potentially for many polycondensation polymers and thus be useful for many high-performance applications.