• 文献标题:   Ultrahigh-Capacity Lithium-Oxygen Batteries Enabled by Dry-Pressed Holey Graphene Air Cathodes
  • 文献类型:   Article
  • 作  者:   LIN Y, MOITOSO B, MARTINEZMARTINEZ C, WALSH ED, LACEY SD, KIM JW, DAI LM, HU LB, CONNELL JW
  • 作者关键词:   holey graphene, binderfree, lithiumoxygen batterie, dry processing, areal performance
  • 出版物名称:   NANO LETTERS
  • ISSN:   1530-6984 EI 1530-6992
  • 通讯作者地址:   Natl Inst Aerosp
  • 被引频次:   51
  • DOI:   10.1021/acs.nanolett.7b00872
  • 出版年:   2017

▎ 摘  要

Lithium-oxygen (Li-O-2) batteries have the highest theoretical energy density of all the Li-based energy storage systems, but many challenges prevent them from practical use. A major obstacle is the sluggish performance of the air cathode, where both oxygen reduction (discharge) and oxygen evolution (charge) reactions occur. Recently, there have been significant advances in the development of graphene-based air cathode materials with a large surface area and catalytically active for both oxygen reduction and evolution reactions, especially with additional catalysts or dopants. However, most studies reported so far have examined air cathodes with a limited areal mass loading rarely exceeding 1 mg/cm(2). Despite the high gravimetric capacity values achieved, the actual (areal) capacities of those batteries were far from sufficient for practical applications. Here, we present the fabrication, performance, and mechanistic investigations of high-mass-loading (up to 10 mg/cm(2)) graphene-based air electrodes for high-performance Li-O-2 batteries. Such air electrodes could be easily prepared within minutes under solvent-free and binder-free conditions by compression-molding holey graphene materials because of their unique dry compressibility associated with in-plane holes on the graphene sheet. Li-O-2 batteries with high air cathode mass loadings thus prepared exhibited excellent gravimetric capacity as well as ultrahigh areal capacity (as high as similar to 40 mAh/cm(2)). The batteries were also cycled at a high curtailing areal capacity (2 mAh/cm(2)) and showed a better cycling stability for ultrathick cathodes than their thinner counterparts. Detailed post-mortem analyses of the electrodes clearly revealed the battery failure mechanisms under both primary and secondary modes, arising from the oxygen diffusion blockage and the catalytic site deactivation, respectively. These results strongly suggest that the dry-pressed holey graphene electrodes are a highly viable architectural platform for high-capacity, high-performance air cathodes in Li-O-2 batteries of practical significance.