▎ 摘　　要

To meet the ever growing demand for high energy density and high power density lithium ion batteries, silicon (Si) has been spotlighted as a promising anode material due to its high theoretical specific capacity. However, the practical use of Si anodes is hindered by the large volume change during the lithiation/delithiation process and resultant electrode pulverization. Significant progress has been made using nanostructured Si-based materials, but their low initial coulombic efficiency and low volumetric capacity are undesirable for practical applications. Si microparticles (SiMPs) are considered as an alternative because of low cost, commercial availability, and high tap density. Herein, we introduce a novel concept of in situ formation of a graphene oxide (GO)-polyacrylic acid (PAA) composite cage encapsulating silicon microparticles (SiMPs) as an anode for LIBs. The mechanically robust covalent bond was formed between the carboxylic acid group of the PAA binder and the hydroxyl group of GO through an esterification reaction. The ester bonded GO-PAA cage confined the pulverized SiMPs within and maintained the structural integrity resulting in high coulombic efficiency, excellent capacity retention, and high rate capability. The as-fabricated electrode delivered a high capacity of 2300 mA h g(-1) after 200 cycles at a high current density of 1000 mA g(-1). Furthermore, stable cycling was achieved with a high Si mass loading (1.98 mA h cm(-2) after 500 cycles) and in a full cell (1.45 mA h cm(-2) after 100 cycles).