▎ 摘　　要

In this work, graphene nanoplatelets (GNP) are used to reinforce epoxy adhesives, and the effects of GNP on mode I fracture toughness of adhesive under water aging condition are studied through double cantilever beam (DCB) test. Although the GNP reinforced adhesives deliver slightly higher G(IC) than neat epoxy before water aging, they exhibit an exceptional 21.93% higher G(IC) after immersing in water for 56 d, at a GNP content of 0.25 w.t.%. According to the experimental results, the effectively dispersed GNP could significantly alleviate the degradation rate in mode I fracture toughness due to the water aging. For example, compared to the non-aging condition, the mode I fracture toughness of neat epoxy decreases by 29.19% after 56 d of water aging. In a stark contrast, the degradation rate for 0.25 w.t.% GNP reinforced adhesive is only 15.76%. In addition, it is observed that GNP greatly improves the fracture surface roughness of DCB samples, which suggests that the incorporation of GNP is able to delay the negative effect of water aging on mode I fracture toughness of adhesive by lowering the diffusion of water into the adhesive, while increasing torturous of the crack propagation path.