▎ 摘　　要

Among the most fundamental challenges encountered in the successful incorporation of graphene in silicon-based electronics is the conformal growth of ultrathin dielectric films, especially those with thicknesses lower than 5 nm, on chemically inert graphene surfaces. Here, we present physisorbed-precursor-assisted atomic layer deposition (pALD) as an extremely robust method for fabricating such films. Using atomic-scale characterisation, it is confirmed that conformal and intact ultrathin Al2O3 films can be synthesised on graphene by pALD. The mechanism underlying the pALD process is identified through first-principles calculations based on density functional theory. Further, this novel deposition technique is used to fabricate two types of wafer-scale devices. It is found that the incorporation of a 5 nm-thick pALD Al2O3 gate dielectric film improves the performance of metaloxide-graphene field-effect transistors to a greater extent than does the incorporation of a conventional ALD Al2O3 film. Wealso employ a 5 nm-thick pALD HfO2 film as a highly scalable dielectric layer with a capacitance equivalent oxide thickness of 1 nmin graphene-based tunnelling field-effect transistors fabricated on a glass wafer and achieve a subthreshold swing of 30 mV/dec. This significant improvement in switching allows for the low-voltage operation of an inverter within 0.5 V of both the drain and the gate voltages, thus paving the way for low-power electronics.