▎ 摘　　要

Polluted waters are complex systems with many different co-existing contaminants that make their simultaneous removal a very challenging task. To address this problem, all-in-one ad/ab-sorbent with unique combination of interfacial properties and multiple surface chemistry is developed to simultaneously and efficiently remove several pollutants including heavy metals, dyes, oils, and organic solvents. By mimicking the wetting micro-topology of a darkling beetle with a combined hydrophilic-hydrophobic surface, a new bioinspired adsorbent, graphene biopolymer foam (Alg-Fe3O4-rGO-4S) for removal of multiple water pollutants is engineered by combining alginate (Alg) and reduced graphene oxide (rGO) functionalized with tetrathiol that is also decorated with iron oxide nanoparticles (Fe3O4). This concept is first proved by single pollutant removal, showing adsorption capacity of 789.7 +/- 36 mg/g for methylene blue (MB), 107.0 +/- 2.1 mg/g for Hg (II), 73.5 +/- 0.7 mg/g for Cu (II), and rapid oil-water separation with high sorption capacity (11-18 g/g). A remarkable performance for simultaneous removal of their mixtures in milli-Q, river, and sea water is demonstrated with efficiency for MB (approximate to 90%), Cu (II) (>99.99%) and Hg (II) (100%) and rapid (approximate to 30 s) uptake of organic solvents and oils. The obtained results indicate a valuable potential of proposed concept for simultaneous removal of co-existing water pollutants.