▎ 摘　　要

Graphene oxide/chitosan (GO/CS) nanocomposite was synthesized using a facile method and employed as the sensing material of a quartz crystal microbalance (QCM) sensor to detect amine vapors. Scanning election microscopy (SEM), Fourier transform infrared spectrometer (FT-IR) and UV-visible spectra analysis were performed to characterize the morphology and physicochemical properties of the nanocomposite. The GO/CS obtained was in a porous mesh structure composed of interconnected nanofibers with diameters of approximately 50 nm. A GO/CS functionalized QCM sensor was fabricated and its sensing properties were investigated. Being tested at room temperature, the sensor exhibited high sensitivity to aliphatic amines including methylamine (MA), dimethylamine (DMA) and trimethylamine (TMA), with the sensitivity values of 2.7, 2.3 and 4.8 Hz/ppm, respectively. Their detection limits were all below 3 ppm. The sensor maintained reasonable reversibility, repeatability as well as long-term stability. Combining the specific adsorption properties of chitosan (CS) with some inherent properties of graphene oxide (GO), the GO/CS coated sensor also performed favorable selectivity, especially for MA, DMA and TMA. The sensing mechanism might involve an adsorption desorption process mainly caused by hydrogen bonding of the protonated amine and hydroxyl sites of the GO/CS film with the amine vapors. The underlying analyte sorption properties were further investigated based on the linear solvation energy relationship (LSER) model. This work might contribute to the future development of sensors for detection of amine vapors and broaden the application of GO and CS composite materials. (C) 2016 Elsevier B.V. All rights reserved.