• 文献标题:   3D hierarchical porous graphene nanosheets as an efficient grease additive to reduce wear and friction under heavy-load conditions
  • 文献类型:   Article
  • 作  者:   OUYANG TC, SHEN YD, YANG R, LIANG LZ, LIANG H, LIN B, TIAN ZQ, SHEN PK
  • 作者关键词:   3d graphene, additive, motion mode, friction wear, lubrication mechanism
  • 出版物名称:   TRIBOLOGY INTERNATIONAL
  • ISSN:   0301-679X EI 1879-2464
  • 通讯作者地址:   Guangxi Univ
  • 被引频次:   4
  • DOI:   10.1016/j.triboint.2019.106118
  • 出版年:   2020

▎ 摘  要

Improving tribological properties of grease is highly demanded for reducing energy consumption and mechanical equipment failure caused by friction under heavy-load conditions. Herein, 3D hierarchical porous graphene (3D HPGS), as a lithium grease additive, is investigated by the measurements of morphologies and wear volume loss of worn surface in three motion modes. The results demonstrate that the addition of graphene can significantly enhance the friction-reduction and anti-wear capacities of the grease and thus results in a much smoother worn surface. In particular, the grease with 0.3 wt% graphene can be reduced by 52.0% and 20.3% for the wear volume loss and friction coefficient respectively, compared to that of the original one. The outstanding anti-wear and friction-reduction properties of 3D HPGS is originated from the evidences that graphene can coat onto the rubbing interface and form protective films to prevent the direct contact of friction pairs, thus reducing the friction and wear. The results indicate the great potential for 3D HPGS as lubricant additives to save energy and prolong the mechanical equipment service life.