▎ 摘　　要

In this study, an electrochemical sensor was developed for nitrite (NO2-) sensing based on the modification of the surface of a glassy carbon electrode (GCE) with a graphene oxide (GO) and poly (3,4-ethylenediox-ythiophene):poly(styrenesulfonate) (PEDOT:PSS) composite. The structure, morphology, and electron transfer resistance of the GO/PEDOT:PSS composite were characterized using Raman and infrared spectroscopies, scanning electron microscopy, and electrochemical impedance spectroscopy. Based on the results, the GO/ PEDOT:PSS-modified GCE displays a higher intensity peak current for NO2- oxidation (similar to 8 times higher) than bare GCE over a potential range of 0.4-1.1 V vs. Ag/AgCl. In addition, this proposed NO2- sensor shows a linear dynamic range in the concentration range of 1-200 mu M, with a regression coefficient of 0.99. The limit of detection and limit of quantitation of NO2- measurement were determined as 0.5 mu M (0.0345 mu g mL-1) and 5 mu M (0.345 mu g mL-1), respectively. Moreover, the stability and reproducibility of the GO/PEDOT:PSS-modified GCE are excellent and its selectivity is good, with a relative standard deviation of < 5%. The performance of this proposed sensor was also compared with the standard spectrophotometric technique used in NO2- determi-nation in real samples and showed no significant difference at a confidence interval of 95%. Therefore, it can be concluded that the as-prepared NO2- sensor based on the GO/PEDOT:PSS-modified GCE shows good analytical performance and is a potential candidate for practical application in environmental NO2- detection.