▎ 摘　　要

Lauric acid (LA) shows much potential as one organic phase change material (PCM) for thermal energy storage, owing to its suitable melting point, relatively high thermal/chemical stability and latent heat. However, the LA-based thermal storage method invariably suffers from the big challenges of liquid leakage tendency and low thermal conductivity of single lauric acid, limiting immensely its practicality. Herein, one encapsulation and modifying strategy to fabricate high conductive and low liquid leakage composite phase change materials (CPCMs) for photo-thermal storage was proposed by constructing novel graphene doped LA/g-C3N4 CPCM. Firstly, LA is infiltrated into a novel two-dimensional porous matrix - the graphitic phase carbon nitride (g-C3N4) to prevent liquid leakage in the solid-liquid phase change process. Then it is further incorporated with a certain amount of graphite nanoplatelets to further enhance thermal conductivity. The encapsulation and modifying strategy enable the graphene doped LA/g-C3N4 to show excellent thermal storage performance for both heat and light energy, low liquid leakage, and high thermal stability. The hybrid LA/g-C3N4 with 5 wt% graphene (CPCM3) modification has a melting temperature of 45.88 degrees C and enthalpy of 159.19 J/g. The corresponding solidification temperature and enthalpy are 43.36 degrees C and 144.40 J/g, respectively. Its thermal conductivity at 50 degrees C is enhanced to 0.9338 W/(m.K) (one time higher than single LA), also superior to the state-of-the-art LA-based CPCMs. After 100 thermal cycles, the composite phase change material only suffers low mass loss and latent heat loss of phase change, which proves the good thermal reliability. Furthermore, TGA and DTG data indicate that CPCM3 can maintain good thermal stability in the normal operating temperature range. In the whole, the joint effect of the porous g-C3N4 matrix and graphene modification improve the thermal storage performance of LA through the improvement of liquid immobilization and thermal conductivity. This work provides a promising strategy for fabricating high conductive and low liquid-leakage CPCM toward enhanced photo-thermal storage.