▎ 摘　　要

Modified graphene oxide (GO) nanosheets as fillers within poly(ether-b-amid) (PEBA) copolymer as matrix were used for mixed matrix membranes (MMMs) fabrication to improve CO2 capture. The GO nanosheets were modified by polypyrrole (PPy) and zinc cations. The former that have conjugated N-containing groups provided a high degree of affinity toward CO2, and the latter has facilitated the gas molecules transport through the gas channel passages. The different modified GO nanosheets were characterized by HRTEM, FT-IR, FESEM, XRD, and XPS analyses. Also, the FT-IR, XRD, AFM, and SEM methods were used for the structural and morphological characterizations of the prepared MMMs with 0.1 wt% of the nanofiller. Gas permeation tests for CH4, N-2, and CO2 were then performed for all prepared membranes. Compared to the neat PEBA membrane, the selectivity of both CO2/CH4 and CO2/N-2 for PEBA-GO-PPy membrane increased up to 62% and 51% and for the PEBA-GO-PPy-Zn membrane increased up to 58% and 56%, respectively. Furthermore, the PEBA-GO-PPy-Zn disclosed a 10% increase in permeability of CO2 than the neat membrane. For PEBA-GO-PPy MMM, the permeability of CO2 was 122.4 Barrer, and the selectivity of CO2/CH4 and CO2/N-2 was 29.8 and 122.5, respectively. Moreover, the gas separation results for PEBA-GO-PPy-Zn MMM were about 131.8 Barrer for CO2 permeability and 30.7 and 119.2 for CO2/CH4 and CO2/N-2 selectivities, respectively. Besides, the CO2/N-2 selectivity of PEBA-GO-PPy and PEBA-GO-PPy-Zn overcomes the Robeson's upper bound.