▎ 摘　　要

Stable and well dispersed functionalized graphene-ethylene glycol (EG) + distilled water nanofluids having graphene nano-sheets (GnS) volume concentration between 0.041 and 0.395 vol.% are prepared without any surfactant. Graphene nano-sheets are prepared from high purity graphite powder by Hummers method followed by exfoliation and reduction by hydrogen gas. Thus, obtained hydrogen exfoliated graphene (HEG) is then functionalized using acid. The graphene nano-sheets are characterized using XRD, TEM, Raman spectroscopy, and FTIR spectroscopy. Thermal conductivity and viscosity measurements are performed both as a function of graphene loading and temperature between 10 and 70 degrees C. Thermal conductivity enhancement of similar to 15% for a loading of 0.395 vol.% f-HEG is observed at room temperature. The measured nanofluid's thermal conductivity is explained well in terms of the expression derived by Nan et al. (J. Appl. Phys. 81, 6692 (1997)), which considers matrix-additive interface contact resistance of mis-oriented ellipsoidal particles. The viscosity of the prepared f-HEG nanofluids and the base fluid (EG + distilled water) displays non-Newtonian behaviour with the appearance of shear thinning and nearly 100% enhancement compared to the base fluid (EG + DI water) with f-HEG loading of 0.395 vol. %. Known theoretical models for nanofluid's viscosity fail to explain the observed f-HEG volume concentration dependence of the nanofluid's viscosity. Temperature dependence of the studied nanofluid between 10 and 70 degrees C is explained well by the correlations proposed earlier for nanofluids with spherical nanoparticles. Electrical conductivity of the f-HEG nanofluids shows significant enhancement of similar to 8620% for 0.395 vol.% loading of f-HEG in a base fluid of 70:30 mixture of EG and distilled water. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4793581]