▎ 摘　　要

The relationship between the interfacial bonding, microstructure and mechanical properties of the poly(vinyl alcohol)/graphene oxide nanocomposites (PVA/GO) has been investigated by controlling the water content through a dehydration process. The interfacial bonding in PVA/GO was predominantly by hydrogen bonds which were strongly affected by the dehydration process. Micro-voids in the microstructure formed after dehydration due to the shrinkage of the fibrils. A variety of hydrogen bonds including water-water, water-GO and water-PVA can be replaced with the strong PVA-GO interfacial bond resulting in a transition from ductile to brittle fracture. The tensile modulus and strength properties of the PVA and PVA/GO increased as the amount of residual water reduced, while the fracture strain was decreased. The surface mechanical properties of PVA/GO measured by nanoindentation showed broadly similar trends with water content as the bulk mechanical properties. However, there was a threshold value of approximately 3 wt.% water below which the surface mechanical properties decrease slightly. The indentation modulus was higher than the tensile modulus by a factor of at least three. The combined influence of the microstructure and the distribution of water in the nanocomposite is considered to be responsible for this. (C) 2015 Elsevier Ltd. All rights reserved.