▎ 摘　　要

Using polyaniline nanofibers and graphene oxide sheets, we demonstrate here the successful layer-by-layer (LbL) assembly of the two anisotropic nanomaterials using a water-based spray-on approach. The processing parameters most critical to the production of uniform electrodes are blow-drying time and removal of the rinsing step. The resulting polyaniline nanofiber/graphene oxide films are electrochemically reduced to convert graphene oxide to reduced graphene oxide, as evidenced by a distinctive change in colour and Raman spectra. The architecture of the electrode is highly porous (74% void), which facilitates ion transport. The electrodes' ability to store charge is evaluated as a function of thickness in non-aqueous conditions (LiClO4 in propylene carbonate, lithium metal anode). The capacity reaches values as high as 114 mA h g(-1) (45 mA h cm(-3)) at 0.03 A g(-1). Besides capacity, other performance metrics (energy and power) are compared against control electrodes made by a different processing approach, dip-assisted LbL assembly. It is found that spray-assisted LbL assembly is over 70 times faster and yields electrodes with better rate capability relative to dip-assisted LbL assembly.