▎ 摘　　要

Herein, the development of a cost-effective system is reported for the mass production of electrochemically exfoliated graphene (EEG) using multiple graphite-stainless-steel electrodes (multicells) in a series configuration and its application to heat transfer. Exfoliation using series-configured multicells leads to the production of high-quality graphene (a few layers of graphene sheets with a low oxygen content and a high C/O ratio of 16.2) at a rate of 30 g per half hour (one-batch). Furthermore, EEG paper is fabricated by the vacuum filtration of the EEG dispersion, and further thermal annealing and mechanical-compression processes are used to investigate the effects of heat and pressure on the thermal conductivities of the EEG paper. EEG paper with wide (100-1000 W m(-1) K-1) and narrow (100-200 W m(-1) K-1) ranges of thermal conductivity is obtained when thermally annealed and mechanically compressed, respectively, highlighting the high quality of the massively produced and solution processable graphene. This approach provides a cost-effective process for the mass production of graphene, as well offering a feasible route to highly thermally conductive graphene paper for heat-management applications, such as heat-dissipating media in light-emitting-diode displays, and electronic and photonic devices.