▎ 摘　　要

Purpose This study aims to the preparation and tribological characteristics of graphene/triangular copper nanoplate composites (abbreviated as GN/Cu nanoplates) as grease additive and clarifies the growth mechanism and tribological mechanism of GN/Cu nanoplates by different analysis methods. In this paper, it is expected to alleviate the problems of easy aggregation and poor dispersion stability of graphene in lubricants and provide theoretical support for the application of graphene and its composites in the tribology field. Design/methodology/approach In this study, the GN/Cu nanoplates have been successfully prepared by the electrostatic self-assembly method. The structural characteristics of GN/Cu nanoplates were analyzed via transmission electron microscopy and X-ray diffraction. Then the tribological properties of GN/Cu nanoplates were investigated under different loads with SRV-IV [Schwingung, Reibung, Verschleiss (German); oscillating, friction, wear (English translation)] tribotester. White-light interferometry was applied to quantify the wear loss of the disk. The element chemical state on worn surfaces was analyzed by an X-ray photoelectron spectroscope to clarify the tribological mechanism of graphene composites. Findings The electrostatic force between the negative charge of graphene and the positive charge of triangular copper nanoplates promotes the self-assembly of GN/Cu nanoplates. With the addition of GN/Cu nanoplates, the wear loss and average friction coefficient under the load of 200 N have been decreased by 72.6% and 18.3%, respectively. It is concluded that the combined action of graphene deposition film and the copper melting film formed on the worn surface could effectively improve the antiwear ability and friction reduction performance of the grease. Originality/value This manuscript fulfills a new approach for the preparation of GN/Cu nanoplates. At the same time, its tribological properties and mechanism as a lubricating additive were studied which provide theoretical support for the application of graphene and its composites in the tribology field.