▎ 摘　　要

Buffer and/or adhesive layers were used to decrease the dewetting of Ni thin film at graphene growth temperatures of around 900 degrees C. Depositing a thin buffer (Al2O3) layer onto SiO2/Si substrate significantly reduced the dewetting effect and surface roughness of Ni catalyst film. Thin adhesive (Cr) layers with or without Al2O3 buffer layers increased the texturing in (1 1 1) orientation, which was promoted by growing at an elevated temperature (450 degrees C). The effects of pretreatment and growth temperature on crystal orientation, grain size and surface roughness of Ni film were analyzed. Our results indicated a large positive correlation coefficient between the film thickness and surface roughness for thinner and non-buffered films, and a negative correlation coefficient between the thickness and 900 degrees C -annealed film roughness for thicker and buffered films. The graphene coverage was greatly improved over the films grown with Al2O3 and/or Cr layers. In summary, we suggest that growing high quality, large area, 1- or 2-layer graphene on polycrystalline Ni transition metal thin film is optimized by using Al2O3 and/or Cr layers to reduce Ni dewetting, surface roughness, and groove depth while controlling grain size and texturing in (1 1 1) orientation by annealing at 900 degrees C.