▎ 摘　　要

NOVELTY - The vehicle has a camera device (3) whose upper end is opened with a connecting pipeline that is connected with an inner cavity (6). A graphene layer (7) is located at the upper end of the inner cavity and is contact with the placing frame. An inner wall of the connecting pipeline is fixedly connected with a magnesium alloy block. The lower end of a compression spring (8) is fixedly connected with a storage bag (9) that is filled with ammonium chloride powder (10). A left end of the camera device is chiselled with a placing groove. A heat-conducting adhesive tape (19) is located at a right end of a waterproof film (18). The left end of the camera device is fixedly connected with a hydrophobic layer (302). USE - All-weather shooting unmanned aerial vehicle for dynamic dewatering. Uses include but are not limited to reconnaidash machine and drone. ADVANTAGE - The camera device is not easy to be influenced by rain when flying in light rain weather, since the wind of the propeller will blow the rain water surface the waterproof film. The heat absorbing effect of the heat absorbing block is faster. The water-free all-weather shooting unmanned aerial vehicle for dynamic dewatering is provided. DESCRIPTION OF DRAWING(S) - The drawing shows a sectional view of the vehicle. Fixing bottom plate (2) Camera device (3) Inner cavity (6) Graphene layer (7) Compression spring (8) Storage bag (9) Ammonium chloride powder (10) Heat transfer guide plate (11) Waterproof film (18) Heat conducting adhesive tape (19) Sponge pad (301) Hydrophobic layer (302) Ball (1101)