▎ 摘　　要

NOVELTY - High-strength glass fiber composite material comprises 50 pts. wt. polypropylene, 15 pts. wt. graphene, 24 pts. wt. fiber, 40 pts. wt. modifier, 35 pts. wt. flame retardant, 1.5 pts. wt. color masterbatch, 0.8 pts. wt. light stabilizer and 10 pts. wt. compatibilizer. The raw material components of the flame retardant are: 35 pts. wt. polyethylene glycol, 35 pts. wt. amine polyphosphate, 12 pts. wt. melamine and 8 pts. wt. antioxidant. The raw material components of the modifier are: 40 pts. wt. polyvinyl alcohol, 18 pts. wt. glycerol, 4 pts. wt. tributyl phosphate and 5 pts. wt. organic montmorillonite. The fibers include glass fibers and carbon fibers, and the mass ratio of the glass fibers and carbon fibers is 1:1.1. The diameter of the glass fibers is 10 microm. USE - Used as high-strength glass fiber composite material. ADVANTAGE - The material realizes the preparation of high strength glass fiber composite material, inhibits the flame retardant phenomenon of the composite material, improves the heat conducting performance of the composite material, application range is wider, and has high practicability. DETAILED DESCRIPTION - High-strength glass fiber composite material comprises 50 pts. wt. polypropylene, 15 pts. wt. graphene, 24 pts. wt. fiber, 40 pts. wt. modifier, 35 pts. wt. flame retardant, 1.5 pts. wt. color masterbatch, 0.8 pts. wt. light stabilizer and 10 pts. wt. compatibilizer. The raw material components of the flame retardant are: 35 pts. wt. polyethylene glycol, 35 pts. wt. amine polyphosphate, 12 pts. wt. melamine and 8 pts. wt. antioxidant. The raw material components of the modifier are: 40 pts. wt. polyvinyl alcohol, 18 pts. wt. glycerol, 4 pts. wt. tributyl phosphate and 5 pts. wt. organic montmorillonite. The fibers include glass fibers and carbon fibers, and the mass ratio of the glass fibers and carbon fibers is 1:1.1. The diameter of the glass fibers is 10 microm. The color masterbatch is titanium oxide. The light stabilizer is a benzophenone UV absorber. The compatibilizer is polypropylene grafted maleic anhydride. The antioxidant is antioxidant 1010. The processing technology of the glass fiber composite material, comprises taking polypropylene, graphene, color masterbatch, light stabilizer, compatibilizer, polyethylene glycol, amine polyphosphate, melamine, antioxidant, polyvinyl alcohol, glycerol, tributyl phosphate, organic montmorillonite, glass fiber and carbon fiber, taking the polypropylene, compatibilizer, glass fiber, color masterbatch and light stabilizer, placing into a high-speed mixer and mixing for 15 minutes, mixing uniformly, placing into a double-screw extruder, melting and blending under the assistance of ultrasonic device, the ultrasonic frequency is 20 KHz, the temperature of the double-screw extruder is 200degrees Celsius, extruding, cooling and granulating to obtain the material A, (ii) taking the material A, and carbon fiber graphene, placing into the mixer to mix, the mixing temperature is 170degrees Celsius, the mixing time is 13 minutes, the rotating speed of the screw is 40 revolutions/minute, placing into a double-screw extruder, melting and blending under the assistance of ultrasonic device, the ultrasonic frequency is 20 KHz, the temperature of the double-screw extruder is 195degrees Celsius, the rotating speed of the screw is 35 revolutions/minute, the injection pressure is 65 MPa, extruding, cooling and granulating to obtain the material B, (iii) taking polyethylene glycol, vacuum drying for 13 minutes, adding material B, constant temperature stirring for 1-2 hours, stirring uniformly, placing into high temperature vacuum oven at 70degrees Celsius and processing for 3.5 hours, cooling and cooling, crushing by a crusher to obtain material C, (iv) taking the material C, ammonium polyphosphate, melamine and antioxidant, mixing uniformly, placing into a double-screw extruder, melting and blending under the assistance of ultrasonic device, extruding and cooling to obtain the base material, taking the polyvinyl alcohol, placing into a three deionized water, stirring at low speed, adding glycerol, tributyl phosphate and organic montmorillonite, heating to 95degrees Celsius, high speed stirring, stirring speed is 825 revolutions/minute until the polyvinyl alcohol is completely dissolved, keeping the temperature for 1.1 hours, cooling to room temperature to obtain the modifier, taking the base, using dip-coating coating, coating the modified agent on the base material, and drying.