▎ 摘　　要

NOVELTY - Automatic temperature-limiting heating cloth capable of being used quickly comprises a self-temperature limiting heating cloth main body (10) comprising a base cloth (1), a self limiting temperature heating wire (2), a first electrode connecting belt (3), a second electrode connection belt (4) and a laminating film layer (5). The vertical distance between adjacent self-limited temperature heating wires is 0.1-10 cm. The first and second electrode connecting belts are respectively woven on the base cloth as warps, and are respectively connected to the positive and negative electrodes of the power supply. USE - Self-limiting temperature heating cloth capable of being used quickly. ADVANTAGE - The self-limiting temperature heating cloth is provided with an insulating layer and a bonding layer, thus, realizing quick use, convenient use, and the setting of the insulation layer can improve the use safety performance of the whole application insulating performance, insulating safety, heat utilization efficiency. The application model is softer, light and thin, convenient and fast to use. The first and second electrode connecting belts are connected with the power supply positive negative electrode the base cloth, and thus, the application model has the advantages of fast use and the application has wide application, it can replace the existing heating belt. DETAILED DESCRIPTION - An INDEPENDENT CLAIM is included for the method for preparing self-limiting temperature heating cloth capable of being used quickly, which involves: 1. preparing materials, PP, EVA, HDPE resin granules for drying treatment for further use, conductive filler, antioxidant, nano zinc oxide, PE wax, zinc stearate according to the proportion, accurately for further use; 2. according to the proportion measuring, finishing the drying of PP, EVA, HDPE resin granules and metering accurate conductive filler, antioxidant, nano zinc oxide, PE wax, zinc stearate after mixing uniformly banburying temperature is 160℃ time 300-320s, the material is flow dynamic for further use; 3. extruding and granulating the flow dynamic material obtaining spinning master batch with grain diameter of 2.0- 2.2mm, drying for further use; 4. using terylene yarn as the leading wire extruding the spinning master batch at 160-170℃ the extruded molten material is attached to the outer surface of the polyester yarn water, cooling, drying obtaining the finished product self-limiting temperature heating wire. DESCRIPTION OF DRAWING(S) - The drawing shows the structure schematic diagram of the self-limiting temperature heating cloth main body. 1Base cloth 2Self-limiting temperature heating wire 3First electrode connecting belt 4Second electrode connecting belt 5Spraying film layer 30Conductive fibre