▎ 摘　　要

NOVELTY - Adhesive comprises 1-20 pts. wt. polyether trihydric alcohol, 1-15 pts. wt. thio alcohol, 1-26 pts. wt. liquid polysulfide rubber, 1-18 pts. wt. graphene oxide, 1-10 pts. wt. propylene oxide butyl ether, 1-20 pts. wt. acrylic ester emulsion, 1-28 pts. wt. phenolic aldehyde resin, 1-9 pts. wt. dibutyl, 1-20 pts. wt. epoxy resin, 2-35 pts. wt. urea-formaldehyde resin, 5-80 pts. wt. filler, 0.5-6 pts. wt. tackifier, and 1-10 pts. wt. plasticizer. USE - Adhesive. DETAILED DESCRIPTION - INDEPENDENT CLAIMS are included for: (1) preparation of adhesive comprising adding polyether trihydric alcohol, thio alcohol, isocyanate, liquid polysulfide rubber, graphene oxide, propylene oxide butyl ether, acrylic ester emulsion, phenolic resin, epoxy resin, and urea-formaldehyde resin into kneader, mixing, stirring at 30-50 degrees C for 20-30 minutes, adding filler, tackifier, and plasticizer, vacuumizing, slowly heating to 50-60 degrees C, stirring for 1-2 hours, cooling, filtering, and filling using automatic filling device; and (2) device for preparing adhesive comprising reaction device, support, reaction kettle, stirring shaft, bearing, stirring motor, lower sleeve, stirring device, upper sleeve, connecting mechanism, closing machine, spraying mechanism, guide sleeve, feeding hole, guide port, spraying pipe, stirring blade, stirring base, transmission bevel gear, groove, phase location convex block, switching mechanism, telescopic air cylinder, discharging pipe, conveying pump, and valve.