▎ 摘　　要

NOVELTY - The mask has a fixing device that is installed on a mask frame (1), an air outlet device and a bending and folding strip (3). The fixing device is provided with an adhesive strip (2) and a bottom adhesive strip (4). A top of an inner side of the mask frame is bonded with the adhesive strip. Two bottom adhesive strips are respectively bonded to the two ends of the inner bottom of the mask frame. The air outlet device is provided between the adhesive strip and the bottom adhesive strip. The bending and folding strip is provided on the inner side of the mask frame. An outer side of a polypropylene (PP) non-woven inner layer is provided to fixedly connected with the inner side of a water barrier layer. USE - Graphene protective mask. ADVANTAGE - The graphene protective mask provides high-efficiency. The mask is attached to the bridge of the nose by tearing off the adhesive strip, which is very convenient and quick to wear. The adhesive strips tightly fit the mask to the nose, so that the exhaled heat does not come out from upper surface and cause mist on the glasses. The straps are omitted and the temples of the glasses are not be entangled with the straps. The water-absorbing layer and folding strip are set to exhaust or absorb the exhaled hot air as much as possible. The disposal of the moisture does not make the mask wet and does not produce water droplets and making comfortable to wear. DESCRIPTION OF DRAWING(S) - The drawing shows a schematic view of the graphene protective mask. Mask frame (1) Adhesive strip (2) Bending and folding strip (3) Bottom adhesive strip (4) Outlet pipe (6)