▎ 摘　　要

NOVELTY - The ADSS optical cable de-icing system comprises a graphene heating component (2) that is installed on the outer side of the optical cable structure (1). The strain sensing component (3) is installed on the inner side or outer side of the optical cable structure. The optical cable structure is connected with the power supply measurement and control device signal. The strain sensing component is used for obtaining the stress information of the outer surface of the ADSS optical cable to detect the ice coating condition. The strain sensing component used for sending the stress information to the power supply measurement and control device. The power supply measurement and control device is connected with the signal of the heating component graphene. USE - ADSS optical cable de-icing system for use in power communication network. ADVANTAGE - The strain sensing assembly can monitor the strain of the optical cable line icing, and the heating state is adjusted by icing condition. The system can realize the function of de-icing the ADSS optical cable through graphene heating assembly at the same time. The power supply measurement and control device can adjust heating state of the graphene heating component through the icing condition, realizing the feedback effect of the icing. DESCRIPTION OF DRAWING(S) - The drawing shows a schematic view of the ADSS optical cable de-icing system. 1Optical cable structure 2Graphene heating component 3Strain sensing component 21Heating heat insulation body 22Temperature sensor