▎ 摘　　要

NOVELTY - Calender release film comprises 28-50 pts. wt. base material and 28-35 pts. wt. of phenyl silicone oil on the surface of the base material, 1-3 pts. wt. methyl silicone resin, 35-43 pts. wt. organic solvent fully stirred and dispersed, and 1-2 pts. wt. crosslinking auxiliary agent, and 2-3 pts. wt. platinum catalyst auxiliary agent are mixed together. USE - Calendaring release film for the rolling release film of graphene carrier wherein base material layer is a PET film (claimed). ADVANTAGE - The release film has good peeling effect, no cross-linking and residual with the graphene material liquid, high heat-resistant effect, high peeling intensity, and good adsorption force to the graphene. DETAILED DESCRIPTION - An INDEPENDENT CLAIM is included for a method for preparing rolling release film of carrier graphene, which involves: 1. coating the coating material liquid of the release layer to the corona treatment through the mesh roller, the base material surface material liquid of the release layer is transferred to the surface of the base material; 2. griding of the net roller is transferred to the surface of the base material layer, the angle of the scraper is 40-43 degrees Celsius, air pressure of the rubber roller is set at 3.0-4.0 Pa, the coating amount is 0.5-0.65g/m2, which the baking temperature respectively the six sections of drying box as follows 115-125 degrees Celsius, 135-145 degrees Celsius, 145-155degrees Celsius, 135-145degrees Celsius, 115-125degrees Celsius, 95-105 degrees Celsius, the transmission speed of the base material layer is 45-55 m/minutes, degrees Celsius, the baking time of the total coating is 40-50 seconds. DESCRIPTION OF DRAWING(S) - The drawing shows a coating process schematic diagram of calendering release film for graphene carrier. Base material surface material liquid (1) Mesh roller (2) Pet base material layer (3) Release layer (4) Scraper (5) Rubber roller (6)