▎ 摘 要
NOVELTY - Performing anti-corrosion paint processing technology with strong adhesion involves weighing an appropriate amount of epoxy resin, polyoxyethylene alkyl ester and polyacrylate into the mixing equipment for mixing and stirring, heating to 45-65℃ and reacting for 0.5-2 hours to prepare the mixed solution (A). The epoxy curing agent is added to the mixed solution (A), continue to heat, wait for the system temperature to rise to 55-75℃ and reacted for 2.5-3 hours, then cooled down to room temperature, and added an appropriate amount of water under high-speed stirring, titanium dioxide, pigment and talcum powder to prepare mixed solution (B). The aluminum tripolyphosphate, wetting and dispersing agent, defoamer, leveling agent, phosphorus-nitrogen composite flame retardant and graphene microflakes are added to the mixed solution (B), stirred at high speed for 15-20 minutes, and filtered to obtain the anticorrosion coating with strong adhesion. USE - Method for performing anti-corrosion paint processing technology with strong adhesion. ADVANTAGE - The method increases the viscosity of the anti-corrosion coating continuously with the reaction process, so that the resistance encountered during the movement of the end scraper also increases, so that the movable fulcrum moves in the induction cavity, and the pressing block is driven to contact with the power-off switch, the driving motor is turned off, and the stirring process is completed, which not only improve the mixing effect, but also improves the quality of the finished product of the paint. DETAILED DESCRIPTION - An INDEPENDENT CLAIM is included for a mixing equipment used in the processing technology of anti-corrosion coating with strong adhesion, which includes an equipment cylinder and a support frame installed on the outer surface of the equipment cylinder, and a heating plate is installed inside the equipment housing, and drive system is installed on the top surface of the equipment cylinder, and a feeding mechanism is installed on the top surface of the equipment cylinder outside the drive system, and feeding mechanism is used to introduce each coating raw material into the equipment barrel.