▎ 摘　　要

NOVELTY - Processing light-weight environmental protection fiber tile comprises preparing plant fiber, glue and asphalt, the plant fiber is one of straw pulp fiber, hardwood wood pulp, coniferous wood pulp, recycled pulp, (2) transporting the plant fiber to the raw material storage bin, during actual processing, the plant fiber in the raw material storage bin enters the dry material storage bin through a dryer and a cooler in turn, and is dried for use, (3) filling the rubber barrel with glue, and the glue is sprayed out through the glue spraying device, so that the plant fiber and glue are mixed in the glue mixer to obtain a mixture, the glue mixer is equipped with two for applying For the spraying system of different rubber materials, and (4) artificially polishing lightweight environmentally friendly fiber tile embryos and impregnating with asphalt, cooling, painting, inspecting, packaging finished product, and storing before delivery. USE - The method is useful for processing light environment-friendly fiber tile, e.g. brick ceramic tile, glazed tile, oil felt, cement and three-oil two-felt and metal tile. ADVANTAGE - The method solves the problem of environmental protection, impact resistance and silencing performance. DETAILED DESCRIPTION - An INDEPENDENT CLAIM is included for processing light-weight environmental protection fiber tile comprises (1) preparing plant fiber, glue and asphalt, the plant fiber is one of straw pulp fiber, hardwood wood pulp, coniferous wood pulp, recycled pulp; the glue is the thermosetting resin with a concentration of 30-75%, the thermosetting resin is water-soluble, alcohol-soluble or oil-soluble thermosetting resin; the asphalt is NO: 90 or No: 70 modified asphalt; the weight ratio of the plant fiber, thermosetting resin and asphalt is 10:(1-5):(1-3); (2) transporting the plant fiber to the raw material storage bin, during actual processing, the plant fiber in the raw material storage bin enters the dry material storage bin through a dryer and a cooler in turn, and is dried for use; where, the plant fiber after drying in a dryer at 100°C-115°C, the moisture content after drying is less than 5%, and it is crushed to 3-8mm granular or filamentous, (3) filling the rubber barrel with glue, and the glue is sprayed out through the glue spraying device, so that the plant fiber and glue are mixed in the glue mixer to obtain a mixture, the glue mixer is equipped with two for applying For the spraying system of different rubber materials, after weighing, the mixture is paved in a hot press machine for hot pressing molding, the molding temperature is 150°C-220°C, the molding pressure is 10-30MPA, and the hot pressing time is 3- 15min, to obtain lightweight and environmentally friendly fiber tile embryos, (4) artificially polishing lightweight environmentally friendly fiber tile embryos and impregnating with asphalt, cooling, painting, inspecting, packaging, and storing before delivery, where the process of impregnating asphalt is dipping in asphalt at 170-200°C for 20-25 minutes.