▎ 摘　　要

NOVELTY - The cover has a base (1) whose right side is fixedly connected with a supporting plate (11). The right side of the base is provided with an accommodating cavity corresponding to the position of the supporting plate. The upper surface of the base is provided with longitudinal conveying grooves. The middle part of the conveying trough is provided with a punching trough leading to the accommodating cavity. A linkage mechanism included with a mounting seat (51) and a connecting rod. The mounting base is fixedly connected to the right side of the lifting base through the vertically evenly arranged struts. The right side of the mounting seat is fixedly connected with a supporting plate. The bottom of the limiting rod is fixedly connected with the supporting plate. The top of the limiting rod is fixed with an anti-off block. The lower surface of the mounting seat and the right side of the mold base are fixed with shaft rods. The connecting rods are hinged between the shafts. USE - Device for stamping anode battery cover of soft-packed graphene lithium battery cell for use in a battery cap explosion-proof aluminum sheet punching jig. ADVANTAGE - The device is convenient to discharge the finished product, automatically realizes punching, punching, discharging and steel belt feeding process, which can simplify the processing flow and improve the processing speed. DESCRIPTION OF DRAWING(S) - The drawing shows a schematic diagram of the device for stamping anode battery cover of soft-packed graphene lithium battery cell. 1Base 3Mold holder 11Supporting plate 21Transmission chamber 22Feeding assembly 23Motor 41Lifting seat 43Hydraulic cylinder 44Guide rod 46Seat plate 51Mounting seat 52Connecting rod piece 62Discharge seat 71Control box 78Lead