▎ 摘　　要

NOVELTY - The device has a compression unit (3) that includes a linear motor (31), a rotating shaft (32), and a pressure roller (33). The linear motors are arranged in the middle of the upper surface of the bottom plate (1). The rotating shaft are connected to the inner side surfaces of the two linear motor mover seats. The pressing roller is connected to the outside of the rotating shaft. The support rods (8) are arranged on the left and top sides of the two left fixing plates (25). An electric pressure box is provided in the middle of the top of the support plate. The liquid outlet of the electric pressure box is connected to the top of the liquid outlet pipe that is located under the support plate. The input end of the motor (23), linear motor and electric hydraulic fluid box are electrically connected to the output end of the controller (18). An input terminal of the controller is electrically connected to an output terminal of an external power source. USE - Device for producing graphene film coiled material. ADVANTAGE - The device for producing the graphene film coiled material is convenient to use, simple to operate and good in lamination effect. DESCRIPTION OF DRAWING(S) - The drawing shows a schematic structural view of the device for producing the graphene film coiled material. Bottom plate (1) Compression unit (3) Support rod (8) Controller (18) Motor (23) Left fixing plate (25) Linear motor (31) Rotating shaft (32) Pressure roller (33)