▎ 摘　　要

NOVELTY - A glass-based intelligent light-adjusting glass preparing method involves allowing glass substrate and carbon source into the chemical vapor deposition to obtain a graphene glass substrate, and mixing UV-polymerizable system and nematic liquid crystal to obtain an isotropic liquid. The isotropic liquid with a total amount of 1.0-10.0 wt.% is added with radical photoinitiator, mixed uniformly with glass beads, poured into the graphene glass substrate of the liquid crystal cell at 0-60 degrees C under a wavelength of 365 nm for 1.0-30.0 minutes and solidified to obtain the finished product. USE - Method for preparing graphene glass-based intelligent light-adjusting glass. ADVANTAGE - The method for enables preparing graphene glass-based intelligent light-adjusting glass with strong interface bonding force and good stability. DETAILED DESCRIPTION - A glass-based intelligent light-adjusting glass preparing method involves allowing glass substrate under a normal pressure environment and carbon source into the chemical vapor deposition at 400-1100 degrees C for 30-480 minutes to obtain a graphene glass substrate, and mixing UV-polymerizable system and nematic liquid crystal matched with the refractive index at a mass ratio of 3:2-3:7 to obtain an isotropic liquid. The isotropic liquid with a total amount of 1.0-10.0 wt.% is added with radical photoinitiator, mixed uniformly with glass beads, poured into the graphene glass substrate of the liquid crystal cell at 0-60 degrees C under a wavelength of 365 nm for 1.0-30.0 minutes and solidified to obtain the finished product. An INDEPENDENT CLAIM is also included for a glass-based intelligent light-adjusting glass prepared by the method.