▎ 摘 要
NOVELTY - Carbon fiber composite material wire core comprises a substrate layer material modified carbon fiber, an adhesive layer material and an elastic layer material. The preparation of the adhesive layer material comprises adding a high-functionality epoxy resin into a magnetic stirrer, adding 3-5 times propanol, adding 30-40% modified graphene, heating to 70 degrees C, stirring at 220-260 revolutions/minute for 20-30 minutes, adding 2% acrylic emulsion and stirring at 500-600 revolutions/minute for 1-2 hours. The preparation of the elastic layer material comprises adding polyether polyol into polyurethane in a weight ratio of 1:2, adding 1-2 times polyurethane diethylaminoethanol, stirring at 300-500 revolutions/minute for 25-35 minutes, adding 20% glucose pentapropionate, high-speed stirring at 1000-1500 revolutions/minute for 25-35 minutes. USE - Used as carbon fiber composite material wire core. ADVANTAGE - The core contains many benzene ring structures. DETAILED DESCRIPTION - An INDEPENDENT CLAIM is also included for preparing the wire core, comprising (a) feeding substrate layer material and the adhesive layer material into the autoclave at a weight ratio of 2:1, reacting at 80 degrees C and 5MPa for 20-30 minutes, and introducing into the proton radiation box for radiation treatment; (b) forming the base material core using a pultrusion process, and adding the elastic layer material to continuously use the winding forming process to obtain the composite wire core; and (c) treating the composite wire core with pulse current for 5-10 minutes, pressing under the condition of a pressure of 2-5 MPa for 2-5 minutes.