▎ 摘　　要

NOVELTY - An anion light-emitting-diode energy-saving environmentally-friendly lamp has lampshade, light-emitting-diode lighting component, thermal conductor, radiator, power supply driving module device and base. A heat-dissipating paint is uniformly coated on inner wall surface of hollow cavity of heat sink. The heat-dissipating paint comprises mixed resin, graphene, sodium montmorillonite, carboxylated styrene-butadiene latex, silicone methyl branched silicone oil, polyethylene glycol, n-pentane, fumed silica, flame retardant, activated mineral powder and Chinese medicine essential oil. USE - Anion light-emitting-diode energy-saving environmentally-friendly lamp (claimed). ADVANTAGE - The anion light-emitting-diode energy-saving environmentally-friendly lamp has excellent negative ions-releasing characteristics, and removal characteristics with respect to formaldehyde, toluene and total volatile organic compounds. DETAILED DESCRIPTION - An anion light-emitting-diode energy-saving environmentally-friendly lamp has lampshade, light-emitting-diode lighting component, thermal conductor, radiator, power supply driving module device and base. The power supply driving module device is provided in base. A heat conductor and a heat sink are integrally formed by aluminum. The light-emitting-diode lighting assembly is mounted on heat conductor through heat dissipation paint. The rear end of radiator has a hollow cavity. The heat sink and base are connected by thread. Heat-radiating vents are provided on front end of heat sink. Heat dissipation slots are arranged on sidewall of heat sink. The heat-radiating vent penetrates the sidewall of heat sink. A heat-dissipating paint is uniformly coated on inner wall surface of hollow cavity of heat sink. The heat-dissipating paint comprises 60-75 pts. wt. mixed resin, 5-6.5 pts. wt. graphene, 3-4.5 pts. wt. sodium montmorillonite, 4-6.5 pts. wt. carboxylated styrene-butadiene latex, 1.5-2 pts. wt. silicone methyl branched silicone oil, 0.7-1.2 pts. wt. polyethylene glycol, 0.7-1.8 pts. wt. n-pentane, 1-2.5 pts. wt. nano-silica, 7-9 pts. wt. polyacrylonitrile-based carbon fibers, 1-2 pts. wt. fumed silica, 5.5-7 pts. wt. flame retardant, 4-6 pts. wt. modified aromatic amine curing agent, 15-20 pts. wt. solvent, 0.1-0.15 pt. wt. ceria, 1.5-2 pts. wt. activated mineral powder and 1.5-2.5 pts. wt. Chinese medicine essential oil. The mixed resin comprises mixture of phenolic resin and epoxy resin in mass ratio of 2:1-3:1. The polyacrylonitrile-based carbon fibers have length of 0.01 mm. The flame retardant comprises ammonium polyphosphate, melamine and expanded graphite in mass ratio of 2:1.5:1.3. The solvent comprises mixture of diacetone alcohol and butyl ester in mass ratio of 3:1-3:2. The activated mineral powder comprises germanium stone, fluorite, tourmaline and zinc spinel in weight ratio of 2.5:3:3.5:1.7. The tourmaline comprises magnesium tourmaline and lithium tourmaline in weight ratio of 4:3. The activated mineral powder has particle size of 15 mu m or less. The heat-dissipating paint is prepared by weighing and placing mixed resin, sodium montmorillonite, carboxylated styrene-butadiene latex, silicone methyl branched silicone oil, polyethylene glycol, n-pentane, nano-silica, polyacrylonitrile-based carbon fibers, graphene, fumed silica, flame retardant and solvent in mixer, high-speed mixing and concentrating mixture at 80 degrees C for 40 minutes, removing evenly-mixed mixture from mixer to obtain mixture (a), mixing 50-60 pts. wt. dyer's woad leaves, 15-20 pts. wt. long lyophilized green mulberry leaves, 4-6 pts. wt. Cyrtomium fortunei, 15-20 pts. wt. breaking bowl flower, 1-3 pts. wt. radix bupleuri, 1-3 pts. wt. Aloe vera, 1-3 pts. wt. Phellodendron, 1-3 pts. wt. Forsythia, 3-4 pts. wt. radix salviae miltiorrhizae, 3-4 pts. wt. flaccid knotweed herb and 5-8 pts. wt. Stemona, removing impurities, placing mixture in vacuum oven at -20 degrees C for 2-3 hours, pretreating mixture with microwave dryer at 17 kW for 30-40 minutes, pulverizing material with pulverizer to obtain API powder of 60 mesh, extracting raw material powder with supercritical carbon dioxide extraction device at 28 MPa, 45 degrees C and carbon dioxide flow of 1100 L/hour for 2 hours, collecting crude oil with separator, placing crude oil in frozen environment at 5 degrees C for 70 minutes, high-speed centrifuging frozen crude oil at 17000 rpm for 25 minutes, removing impurities, placing mixture in vacuum oven at 85 degrees C for 3 hours to obtain volatile oil (b), washing and drying 1-3 pts. wt. white peony, 0.6-1.8 pts. wt. musk, 3-4 pts. wt. purslane, 3-4 pts. wt. ageratum, 3-4 pts. wt. unbracteolated spurge root and 3-4 pts. wt. Chinese mugwort, crushing mixture with ultrafine grinder to 30 mesh, adding deionized water, soaking mixture for 5 hours, adding water such that the content of water is 7 times of raw material, stirring and dispersing to obtain traditional Chinese medicine mixture, decocting traditional Chinese medicine mixture at 80 degrees C for 2 hours, collecting distillate, adding ether, extracting mixture, mixing distillate and ether in volume ratio of 2.5:1, taking upper oil phase, adding 0.13-0.2 pt. wt. anhydrous sodium sulfate, drying mixture to obtain volatile oil (c), mixing volatile oil (b) and volatile oil (c) to obtain mixed oil, adding wheat germ oil, geranium oil, snow lotus essential oil, lemon essential oil and grapefruit essential oil, stirring mixture for 45 minutes, maintaining mixture Stand for 30 minutes, filtering and cleaning mixture to obtain Chinese medicine essential oil, mixing traditional Chinese medicine essential oil and mixture (a) in blender at 70-80 degrees C for 15 minutes to obtain premix, adding premix to ball mill, adding ceria, activated mineral powder and modified aromatic amine curing agent, concentrating and grinding mixture at 70-80 degrees C for 4.5 hours and filtering mixture to remove impurities. The mass ratio of mixed oil, wheat germ oil, geranium oil, snow lotus essential oil, lemon essential oil and grapefruit essential oil is 2:0.5:0.5:0.6:0.4:0.5.