▎ 摘　　要

NOVELTY - Graphene-coated electrode material preparation system comprises a box body (1) and a bottom beam (2), the inner part of the outer wall of the bottom beam is provided with a reciprocating component (4), the inner part of a top plate and a bottom plate of the reciprocating component is provided with a vibration component (5), the inner part of the left and right sides of the upper end of the box body is provided with a feeding component (3), and the left and right sides of the upper end of the inner wall of the box body are respectively provided with a heating plate and a radio frequency coil, the reciprocating component comprises a bevel gear set, a sliding rail, a supporting rod, a bottom plate, a conveyor belt, a first motor, a round rod, a top plate, an upright post and a power roller. USE - Used as graphene-coated electrode material preparation system. ADVANTAGE - The graphene-coated electrode material preparation system: drives the graphene raw material inside the material box to continuously shake; makes the contact of methane and acetylene gas in the air more uniform; and avoids the problem that the traditional graphene raw material is conveyed through the conveyor belt, and one side always sticks to the surface and is not easy to contact with the gas. DESCRIPTION OF DRAWING(S) - The drawing shows a structural schematic view of graphene-coated electrode material preparation system . 1Box body 2Bottom beam 3Feeding component 3a1Vertical cushion block 3a2Rotating shaft 3a3Tapered hopper 3a4Transverse cushion block 3a5Gear 3a6Electric push rod 4Reciprocating component 4a1Bevel gear set 4a2Slide rail 4a3Supporting rod 4a4Bottom plate 4a5Conveyor belt 4a6First motor 5Vibration component 5a1Material plate 5a2Cover plate 6Vacuum tube 7Radio frequency coil 8Heating plate 9Air inlet pipe