▎ 摘　　要

NOVELTY - Stirring system based on graphene electric heating film comprises a base (1), where one end of the base is top part fixed with an upright post (6), and the top of the upright post is horizontally fixed with a top plate (7). A lifting screw (8) is movably installed between the top plate and the base. A lifting motor (9), the transmission shaft of the lifting motor passes through the top board (7) and is connected with the lifting screw rod (8), and a lifting seat (10), the lifting base (10) far away from one side of the column (6) is fixed horizontally with a lifting plate (11), a stirring main shaft (12) is provided at the bottom of the lift plate, and a stirring motor (13) is installed on the top part of the top. The transmission shafts of the stirring motor penetrates the lifting plate and is in communication with the main shaft. A rotating arm (21) is horizontally installed at the upper portion of the mixing main shaft, and the rotating arm is provided with a stirring driven shaft. USE - Stirring system based on graphene electric heating film used in graphene heating film technology field. Can also be used in heat assisted magnetic resonance imaging (HAMR). ADVANTAGE - The stirring system has reasonable structure and good stirring effect after using the solution. The stirring barrel is clamped and located by the fixed locating plate and the movable locating plate, after locating, the to-be-stirred raw material added in the stirring barrel, after adding, the lifting motor drives the lifting screw to rotate clockwise and the lifting seat far away from one side of the upright post is horizontally fixed with a lifting plate. DESCRIPTION OF DRAWING(S) - The drawing shows the whole structure schematic diagram of a stirring system based on graphene electric heating film. 1Base 2End plate 3Telescopic cylinder 4Stirring barrel locating area 5Fixed locating plate 6Upright post 7Top plate 8Lifting screw rod 9Lifting motor 10Lifting seat 11Lifting plate 12Stirring main shaft 13Stirring motor 14Stirring driven shaft 15First gear 16Second gear 17Stirring blade 18Shaft sleeve 19Skid-proof layer 20Guide column 21Rotating arm