▎ 摘　　要

NOVELTY - Printing and dyeing textile fabric containing grapheme comprises blending grey cloth raw material adopts satin blended fabric blank cloth, warp adopts pure cotton fiber, the weft is graphene, bamboo charcoal, and combed cotton, spreading the grey cloth and sewing the head, singeing and desizing, singeing and removing the floss on the surface of the grey cloth, removing the slurry of the fabric fiber, where working solution for the hot rolling comprises is 0.7 g/l magnesium sulfate, 4 g/l chelate agent MEX, 30-33 g/l sodium hydroxide, 4 g/l sodium silicate, 12-14 g/l osmotic agent 22ECO hydrogen peroxide, and water (balance), the feeding order of the burning and rolling is: water, magnesium sulfate, chelate agent MEX, caustic soda, sodium silicate, osmotic agent 22ECO hydrogen peroxide, adding water to constant volume, singeing method is: two times of front surface, two times of reverse surface, after singeing, using water to extinguish fire. USE - The method is useful for printing and dyeing textile fabric containing grapheme. ADVANTAGE - The fabric has soft, and smooth hand feeling. DETAILED DESCRIPTION - Printing and dyeing textile fabric containing grapheme comprises (1) blending grey cloth raw material adopts satin blended fabric blank cloth, warp adopts pure cotton fiber, the weft is graphene, bamboo charcoal, and combed cotton, (2) spreading the grey cloth and sewing the head, singeing and desizing, (3) singeing and removing the floss on the surface of the grey cloth, removing the slurry of the fabric fiber, where working solution for the hot rolling comprises is 0.7 g/l magnesium sulfate, 4 g/l chelate agent MEX, 30-33 g/l sodium hydroxide, 4 g/l sodium silicate, 12-14 g/l osmotic agent 22ECO hydrogen peroxide, and water (balance), the feeding order of the burning and rolling is: water, magnesium sulfate, chelate agent MEX, caustic soda, sodium silicate, osmotic agent 22ECO hydrogen peroxide, adding water to constant volume, singeing method is: two times of front surface, two times of reverse surface, after singeing, using water to extinguish fire, the high feed formulation is 3 times of the dosage of the working liquid formulation, (4) stacking at temperature of 35-40degrees Celsius, where stacking humidity is not less than90%, revolution 11-12 revolutions per minute, stacking time is 20-24 hours, (5) orderly rinsing by two rinsing machines, firstly adding oxygen bleaching liquid to No. 1-4 water washing tank of two rinsing machines, placing grey cloth into the rinsing machine, rinsing rolling pressure: where the two-roller padder of the rinsing machine I is 0.2-0.3 MPa, the front threeroller padder is 0.35 to 0.4Mpa, the working groove padder is 0.2-0.3 MPa, and the rear three-roller padder is 0.35-0.4 MPa, two-roller padder of the rinsing machine II is 0.2-0.3 MPa, No. 5 two-roller padder is 0.3 MPa, the front three-roller padder is 0.35-0.4 MPa, the working groove padder is 0.2-0.3 MPa, the rear three-roller padder is 0.35-0.4 MPa, the cylinder pressure of the padder tension frame: the front tension frame of the three-roller padder is 0.3-0.4 MPa, and the front tension frame of the two-roller padder is 0.3-0.4 MPa, (6) shaping ironing at temperature of 180degrees Celsius, the speed is 40 m/minute, the pressing pressure is 0.4 MPa, (7) printing by normal active printing mode, (8) steaming at temperature of 102degrees Celsius at the speed of 36 m/minute, where the steaming time is 8-10 minutes, (9) adopting use of two water washing machine namely washing machine I and water washing machine II washing water for two times, where the speed is 30 m/minute, the water washing tank is divided into a cold water tank and a high temperature tank, the cold water tank temperature is room temperature, the high temperature tank temperature is 93plus minus3degrees Celsius, the first water washing, using water washing machine I, water washing auxiliary agent comprises 2 g/l soaping agent and 2 g/l water softening agent, the flow rate of the auxiliary agent is 100 ml/hour, the second water washing, using water washing machine II, adding acid to adjust the pH value of 5.5-7, so as to adjust the cloth pH value is neutral or acidic, (10) providing rolling liquid containing 40 g/l resin 7636, 30 g/l softening agent 936, 10 g/l urea, rolling liquid machine adopts forming machine, the pressing pressure is 0.2 MPa, the rolling speed is 30 m/minute, the temperature of the rolling liquid is: the first section drying room is 130degrees Celsius, the second section drying room 130degrees Celsius, the third section drying room 150degrees Celsius, the fourth section drying room 170degrees Celsius, the fifth section to the eighth section drying room 190degrees Celsius, (11) using water washing machine to wash for one time, the vehicle speed is: 30 m/minute, the temperature of the washing tank is room temperature, (12) softening using softening agent containing 20 g/l softening agent 961, 0-2 g/l SP acid, adopting use of forming machine to soft, where the pressing pressure is 0.4 MPa, the soft speed is 30 m/minute, the softening temperature is 180degrees Celsius, (13) pre-shrinking the cloth after drying at the speed of 50plus minus5 m/minute, the pressing distance is 0-2 mm, the rubber blanket temperature is 105-115degrees Celsius, the blanket temperature is 110-120degrees Celsius, the warp shrinkage rate is 1-2%, (14) finishing the preshrinking cloth to obtain the finished product cloth with good functionality and soft and smooth.