▎ 摘　　要

NOVELTY - The device has a main housing (1) whose bottom end is movably connected with a push rod. A metal block is movably connected under the push rod. The front end of the metal block is movably connected with a conveyor belt. The left and right ends of the conveyor belt are movably connected with chains. A shaft is movably installed at the axis of the chain. A buffer spring is movably connected to the outside of the chain. A rubber block is movably connected to the lower end of the buffer spring. A spring fitting is movably connected under the rubber block. A metal element is movably connected in the middle of the spring fitting. A rack is movably connected to the lower end of the metal element. An action rod is movably installed on the outer side of the rack. A rotating blade is movably connected to the outside of the action rod. A pull rod is movably installed at the upper end of the rotating blade. A blocking port is movably connected to the right side of a slideway. USE - Device for graphene textiles for avoiding disconnection due to excessive friction. ADVANTAGE - The rack is pushed to the two ends to move the rack, and the rack belt moves down synchronously with a rod to loosen the fabric net to a certain extent, when the fabric stacking range becomes larger. The acting rod drives the spring fittings to run, and the spring fittings play an auxiliary role in damping. The acting rods drive the rotating blades to gradually rotate. They blade dissipate heat to a certain extent inside, which achieves the effect of avoiding friction and porting, when the rotating blades rotate. DESCRIPTION OF DRAWING(S) - The drawing shows a front view of the device for graphene textiles for avoiding disconnection due to excessive friction. Main housing (1)